The EZ Coupler 4-in-1 Threaded RV Sewer Adapter, # F02-3305VP fits threaded sewer inlets. You can attach and remove as needed for storage. view full answer...
A collapsable sewer hose support will absolutely still give you adequate drainage even if it is not fully extended,.
I do strongly recommend a high-quality support system such as the Sidewinder RV Sewer Hose Support System # CAM43051 which extends 20' and collapses to 12-1/2", measuring 9-3/4" tall and sloping down to 6-3/4" tall from beginning to end, regardless of if it is extended or not. The Sidewinder Support System works with standard 3" sewer hoses and has snap-fit hinges which... view full answer...
What I strongly recommend instead that will fix your problem is the Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter # F02-4350 because it is designed for the exact problem you are having. It will flush the hoses so the waste water does not stay the "T" on your photo. It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue.
I have added a link to a video... view full answer...
The Lippert Waste Master RV Sewer Hose # LC359724 is constructed with an exterior helical coil that lets it extend from its compressed length of 5-feet up to its 20-foot maximum length. The interior white surface of the 3-inch diameter hose is smooth, but if not extended fully the exterior coils will cause the interior to have small circular bumps. The linked photo will help you see what I refer to. The more extended the hose is, the smoother the interior surface will be. view full answer...
UV rays and extreme heat are tough on any materials, even ones made specifically for the outdoor environment. I would say that nearly four years of trouble-free service from your RhinoEXTREME RV sewer hose # CAM39861 is pretty good considering your severe environment. This is their heaviest-duty sewer hose.
My contact at Camco agreed that you must have taken good care of this item since it lasted for almost 4 years in the Arizona desert. My contact also agreed that anything you can do... view full answer...
Thanks for reaching out, lets see what we can find.
**Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic # F02-3111.
This unit will be over 5 inches thick, the bayonet fitting is right at 4 inches but the elbow joint makes it to wide. view full answer...
The EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Red Item # F02-3305VP comes with the cap for the end that drops into the dump station tube. Typically once you install the fitting onto your hose it doesn't need to be removed you would just place the cap on the open end when you are done draining your tanks. view full answer...
The screws included with the Valterra RV Sewer Hose Carrier # A04-5094BK are #14 x 1" self-tapping screws and would require either a 10mm or 3/8" socket in order to drive them into the trailer frame. Since these are self-tapping you would not need to drill out a hole first for the screw to bite through. If you wanted to go with a beefier screw you can pick up additional ones at your local hardware store. view full answer...
The EZ Coupler Cap # F02-3106CL has 4 tabs that will fit over the 4 lugs on the sewer drain valve. It does have a 3/4" male thread hose coupler that will allow you to drain your gray water tank without needing your larger sewer hose.
It is also available in Black # F02-3106BK. view full answer...
The PVC nut on the Replacement 4-in-1 Elbow Adapter for SewerSolution Macerator System # SS06 is removable, you simply twist and pull for disconnect, or twist and push for connecting. The Replacement 4-in-1 Elbow Adapter for SewerSolution may work with a garden hose, however, we do sell a direct fit to this product with no modification necessary, with the Extension Hose for SewerSolution Macerator System # SS25. This is a 25' hose that attaches via hose clamps to your SewerSolution Macerator... view full answer...
Thank you for the photo, and there should be sensors with a monitor for your tank that tells you how full it is in order to use the Flush Valve for RV Holding Tanks and Sewer Hoses # F02-4350.
If you don't have that, you can still use the Flush Valve # F02-4350 but you'll want to be sure to limit the water flow going in so you don't have a real mess. But really, this is best used with black water tanks that have monitors which tell you how full it is.
This will work for you unless your... view full answer...
Unfortunately just looking at a picture isn't going to be enough for me to identify what the manufacturer used to glue the 3" pipe reducer # T1041-1 to the other fitting, however I can tell you that you should use some ABS # A05-0303 when you're ready to hook up your new pipe reducer. view full answer...
I'm not 100% sure what you need so I'll give some options for the 1-1/2" grey water adapter for the LaSalle Bristol RV Waste Valve - Sewer Wye - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466N3AR.
There is the LaSalle Bristol RV Sewer Spigot with Flange - for 1-1/2" pipe # 34466V1515S, Valterra RV Sewer Spigot with Flange - MPT - 1-1/2" # T1008-1, and LaSalle Bristol Coupling for RV Sewer System - ABS Plastic - for 1-1/4" pipe # 344633000.
If you need bonding use LaSalle Bristol ABS Solvent... view full answer...
Yes, the Camco 75-Foot RV Drinking Water Hose # CAM22803 is fully compliant with standards set by both the National Safety Foundation (NSF) and also the federal Food and Drug Administration (FDA). The hose is BPA-free and features flexible reinforced PVC construction.
All of Camco's fresh water hoses meet these standards according to my contact there. view full answer...
There should be no problem insulating the Camco RV Heated Drinking Water Hose, part # CAM22900. This hose has a 1/2 inch internal diameter and is 12-ft long.
I recommend using tubular foam insulation that is designed for plumbing pipes. This is easy to find at a local hardware store. view full answer...
I called Valterra and they couldn't confirm or deny if it was possible to combine two Valterra EZ Coil-N-Store Drinking Water Hose # W01-0022.
However if you need a longer hose, we do carry a 75' Camco RV Drinking Water Hose # CAM22803. This provides 50 more feet of hose. We also offer the AquaFresh High Pressure Drinking Water Hose for RV # W01-5600 which is 50' long and will provide 25 more feet than the Valterra. view full answer...
The AquaFresh Drinking Water Hose for RVs - 50' Long x 5/8" Diameter - Item # W01-9600 is made up of a non-toxic material which will not contaminate your drinking water and you won't taste anything besides clean drinking water. There are a bunch of options available and I've included my review video and options if you wanted to learn more about these hoses. view full answer...
If you're referring to weather or not the Replacement Shower Valve for D&W Inc. Spray-Away RV and Marine Unit # PF213247 has a connector to accept a hose like the corresponding Replacement Hose for D&W Inc. Spray-Away RV and Marine Self-Storing Unit # PF267003 for this unit, then yes there is a quick disconnect connector that is pre-installed on the unit.
If this is not what you're after, let me know and I'd be happy to help you further. view full answer...
The heater element of the Camco RV Heated Drinking Water Hose # CAM22900 runs down the length of the entire hose and the temp sensor is located at the end of hose that is opposite of the end with the plug. view full answer...
Go To Results